чип тюнинг Mercedes A / A Berline 250 | от UPstage, Киев

More detailsOriginalAfter tuningIncrease
Torque350 Nm400 Nm+ 50 Nm
Estimated fuel consumption reduction +/- 8 %400 USD
More detailsOriginalAfter tuningIncreases
Power211 hp250 hp+ 39 hp
Torque350 Nm400 Nm+ 50 Nm400 USD
Available options
«BART» (Bangs After Releasing Throttle) / Anti-lag.
"Pops & Bangs" also called "Crackle Map", "Burble on overrun" or "Schubblubbern" is the sound of fuel detonating in your exhaust when releasing the throttle. We developed this feature to keep the turbocharger's rpm up and thus greatly reduce reaction time when you go back on the throttle after a deceleration. Basically it's an anti-lag feature for the turbo but of course you can also use it to impress your friends and to give your car a racecar sound!
Map Switching / Multimap
The Map Switch or Multimap feature allows the driver to cycle through a number of different engine calibrations and operating modes. You can just select the driving mode that suits your needs best at any given time like race, sport, normal, eco, full stock, valet or anti-theft mode.
Catalyst Heating.
The catalytic proces in the catalyst only works if the catalyst is hot, so in order to keep emissions low, it's critical that the catalyst is heated quickly after the engine start.It's the coldstart function that has to heat up the catalyst as fast as possible to it's optimal operating temperature. This is achieved by increasing idle RPM and changing the ignition timing.The increased idle rpm of the cold start and the increased exhaust sound that goes with it might be annoying if your car is catless.
Start-Stop Desactivation
Exhaust Flap Control.
Exhaust Flap Control allows you to control or change the opening and closing of the exhaust valves for more or less sound. When the valves are closed, the exhaust is in quiet mode. When fully opened, the exhaust system is in maximum flow mode and therefore the sound of your exhaust is louder.
Price:Price on demand
We guarantee
  • Engine tuning on dyno.
  • Individual software development.
  • Free firmware updates.
  • Free computer diagnostics.
  • 3 years warranty.
  • 14 days money back, if expectations are not met - we will refund your money.
We guarantee
  • Engine tuning on the dyno.
  • Customized software development.
  • Free firmware update.
  • Free computer diagnostics.
  • 3 years warranty.
  • 14 days money back, do not meet expectations - we will return the money.
Power curve
чип тюнинг мерседес
  • Stage 1

    Reprogramming

    Stage 1 consists of individual reprogramming of the vehicle's engine management system by adjusting engine parameters (ignition, injection, ...) with analysis and testing of the firmware on a dynamometer. All engine parameter values at this stage remain within the safety standards set by the manufacturer. Stage 1 is 100% safe, in short, more driving pleasure without worries!
    A 14 day test period is available for turbo engines, this is if the firmware is not working correctly and we are unable to fix the problem and provide a quality service.

  • Stage 2

    Reprogramming + intake and exhaust optimization

    For those who want a little more than Stage 1, we have Stage 2, which consists of optimizing a number of engine components to help increase engine efficiency. First and foremost, we're talking about the intake and exhaust system. Many air intake systems are very restrictive due to their anti-resonance structure, which is designed to suppress unwanted intake noise. By installing a sport air filter or a custom air intake, more airflow enters the engine and as a result, we get a great power gain. As we ensure that the manufacturer's safety standards are maintained, on Stage 2, it is sometimes necessary to strengthen certain parts of the car, e.g. the clutch. For each vehicle, each Stage 2 indicates which parts will be replaced or modified.

  • Stage 3

    New engine parts

    With Stage 3 we go even further by replacing internal or vital parts of the engine or turbocharger. This stage involves increasing the displacement of the engine, placing sporty camshafts, installing more powerful turbochargers. Sometimes there are some reliability risks present, but not always. Manufacturers often create 1 main cylinder block and using larger turbos and injectors they can create 2 different engines. It goes without saying that in some cases you can increase the power of your engine by using original parts from the more powerful version of the engine and this will not affect its reliability because the manufacturer has already taken care of everything.

  • ECO tuning

    ECO tuning is an individual reprogramming of the vehicle's engine control system. Engine parameter settings (ignition, injection, ...) are individually developed on a dynamometer. All values that are programmed and adapted have one goal: to reduce fuel consumption!